小浮萍 - Powered by Drupal!

昨天發現我的Transmission BT不知為何讓CPU使用率飆到7X%, 試途將它重新關閉後又重新啟動一次 發現好像不能正常啟動, 所以用debug模式看了看結果發現以下的訊息, 程序也沒有正常執行

bcm4780:~# transmission-daemon -f
[11:15:38.021] RPC Server: Adding address to whitelist: 127.0.0.1
[11:15:38.024] RPC Server: Serving RPC and Web requests on port 9091
[11:15:38.027] Transmission 1.75 (9117) started
[11:15:38.077] DHT: Generating new id
Segmentation fault
bcm4780:~# [11:15:38.335] Port Forwarding (NAT-PMP): initnatpmp succeeded (0)
[11:15:38.337] Port Forwarding (NAT-PMP): sendpublicaddressrequest succeeded (2)

到Google查訊好像也找不到相關的訊息..., 後來發現可能是因為上傳的種子檔名長度太長的關系....?
去掉.torrent的副檔名後的長度有69個字, 不知是不是這個造成的影響, 只要把種子檔改成比較短點好像就能正常啟動...?

bcm4780:~/.config/transmission-daemon# transmission-daemon -f
[11:27:08.171] RPC Server: Adding address to whitelist: 127.0.0.1
[11:27:08.175] RPC Server: Serving RPC and Web requests on port 9091
[11:27:08.179] Transmission 1.75 (9117) started
[11:27:08.231] DHT: Generating new id
[11:27:08.585] Port Forwarding (NAT-PMP): initnatpmp succeeded (0)
[11:27:08.586] Port Forwarding (NAT-PMP): sendpublicaddressrequest succeeded (2)

[11:27:16.671] Port Forwarding (UPnP): Found Internet Gateway Device "http://192.168.168.8:49201/"
[11:27:16.673] Port Forwarding (UPnP): Local Address is "192.168.168.8"
[11:27:16.705] Port Forwarding (UPnP): Port forwarding through "http://192.168.168.8:49201/", service "".  (local address: 192.168.168.8:51413)
[11:27:16.707] Port Forwarding: State changed from "Not forwarded" to "Starting"
[11:27:17.053] Port Forwarding: State changed from "Starting" to "???

如果發現如果這樣用過後還是不能啟動transmission的話, 只能進入resume的目錄內的.resume檔刪除後就可以了, 不過這個會造成程式重新hash下載的檔案 :)